Epple, Philipp; Fritsche, Manuel; Steppert, Michael; Steber, Michael (2018)
Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition 2018.
Fritsche, Manuel; Epple, Philipp; Delgado, A. (2018)
Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition 2018.
Gander, M.; Kohls, Niko; Walach, H. (2018)
Deutsche Zeitschrift für Onkologie, 40, 158 - 162., 158-162.
Lucchi, Elena; Roberti, Francesca; Troi, Alexandra (2018)
Energy and Buildings 179, 99–111.
DOI: 10.1016/j.enbuild.2018.08.049
Research and development of high thermal insulation materials for the construction sector requires an accurate characterization of the wall's performance, since that is the main causes of thermal exchanges between the internal and external boundaries. This paper presents a test procedure developed within the EU Project EFFESUS for evaluating the steady-state thermal performance of a masonry wall. A large-scale mock-up of the inhomogeneous wall was tested in a guarded hot box (GHB) apparatus before and after the application of an aerogel-based material. The methodology proposed in this paper is structured in the following steps: (i) definition of the wall geometry and the percentage of stone and mortar, using walls’ photographic records and geometrical surveys; (ii) precise thermal characterization of the material used; (iii) hygrothermal assessment procedure based on infrared technology (IRT) survey, gravimetric test, and monitoring of the internal relative humidity (RH); (iv) steady-state and dynamic thermal simulation; and (v) detailed set-up of the test using the data retrieved from the thermal surveys and simulations. According to the results of IRT surveys and the dynamic simulations, the mock-up was divided into thermal homogeneous parts, verifying the uniformity of the surface temperature and the heat flux in an isothermal area. This approach was validated both for low and high energy performance walls. Results show that the thermal flux was reduced to one third after the application of the aerogel.
Kohls, Niko (2018)
Erlebnistage „Körper, Seele, Geist“, Arnika-Akademie Teuschnitz, 18.10.2018.
Epple, Philipp; Fritsche, Manuel (2018)
Proceedings of the ISimT-18, Symposium on Innovative Simulations in Turbomachinery, Schloss Hohenkammer, Germany, October 15 - 16, 2018.
Holtorf, Christian (2018)
Tagung "Die Zeiten des Ereignisses. Neuvermessung einer historischen Kategorie" am Zentrum für Zeithistorische Forschung Potsdam am 9./10. November 2018..
Hößelbarth, Susann (2018)
Plenarvortrag am 08.10.2018 auf dem „Gemeinsamen Fachkongress der Deutschen Hauptstelle für Suchtfragen (DHS) und dem verband der drogen- und suchthilfe (fdr), 08.-10.10.18 in Berlin .
Kohls, Niko (2018)
Eingeladener Vortrag im Rahmen des Symposiums. „Krebs: Fragen und Antworten jenseits der Schulmedizin", organisiert durch das Tumorzentrum Oberfranken, Kloster Banz.
Nagel, Andreas; John, D.; Scheder, A.; Kohls, Niko (2018)
Prävention und Gesundheitsförderung. doi:10.1007/s11553-018-0670-1.
Fritsche, Manuel (2018)
2. Netzwerktreffen des BayWISS Verbundkollegs Digitalisierung (BWD), Würzburg, September 28, 2018 2018.
Exner, Dagmar; Larcher, Marco; Belleri, Annamaria; Troi, Alexandra; Haas, Franziska (2018)
Conference report: the 3rd International Conference on Energy Efficiency in Historic Buildings: [Visby, Sweden, September 26–27, 2018] / edited by Tor Broström, Lisa Nilsen and Susanna Carlsten.
Haas, Franziska; Herrera Avellanosa, Daniel; Hüttler, Walter; Exner, Dagmar; Troi, Alexandra (2018)
Haas, Franziska; Herrera Avellanosa, Daniel; Hüttler, Walter; Exner, Dagmar...
Conference report: the 3rd International Conference on Energy Efficiency in Historic Buildings: [Visby, Sweden, September 26–27, 2018] / edited by Tor Broström, Lisa Nilsen and Susanna Carlsten.
Hao, Lingjun; Herrera Avellanosa, Daniel; Troi, Alexandra (2018)
Conference report: the 3rd International Conference on Energy Efficiency in Historic Buildings: [Visby, Sweden, September 26–27, 2018] / edited by Tor Broström, Lisa Nilsen and Susanna Carlsten.
Leone, Dario; Larcher, Marco; Troi, Alexandra; Grunewald, John (2018)
Healthy, Intelligent and Resilient Buildings and Urban Environments. 7th International Building Physics Conference, 1401–1406.
DOI: 10.14305/ibpc.2018.ps20
Kohls, Niko (2018)
The Mind, Meditation and Innovation Conference, Invited Lecture, Copenhagen Business School, 18.09.2018.
Ritter, Frank; Krempel, Sandro; Tietze, Sabrina; Backer, Alexander; Wolfschmitt, A.; Drese, Klaus Stefan (2018)
Ritter, Frank; Krempel, Sandro; Tietze, Sabrina; Backer, Alexander; Wolfschmitt, A....
Sensors and Measuring Systems; 19th ITG/GMA-Symposium, Nuremberg 2018, 602 - 605.
Conventional data transmission via cable or electromagnetic waves reaches their limits in harsh or hard-to-reach environments. For example in bore hole inspection, cables can break and electromagnetic waves cannot pass different earth layers. Actual studies showing that guided waves are a possible instrument for cable less data transmission. The known technique works with frequencies below 100 kHz for a wave propagating of long distances and known time delays. This concept limits the data transmission rate to e.g. 250 bit/s at a 2m long steel pipe. Other cable less developments are also known in so-called "wall to wall" communication by means of ultrasonic sound waves. Here, frequencies of 1 MHz are used to transmit data in the order of 550 bit/s through one wall with opposing transducers. In our approach we are using guided waves with a center frequency of 1 MHz. Furthermore a sweep mode is used instead of the pulse position modulation (PPM). Thus, it is possible to be independent of a known transmitter and receiver position and thereby the knowledge of the time delay. Thereby, in contrast to the already known technology it is possible to use a two-dimensional arbitrary surface for data communication. At a first experiment, a data transmission distance of 20 cm at a 3 mm glass plate was build. One single-phase transducer is used as transmitter and two different transducers as receiver to show the independence of position of the receiver. Wave reflections at the edges of the glass plate and dispersion of the guided wave could also be eliminated by the here used algorithm of identifying the biggest amplitude of the received signal. Thereby a transmission rate of 1,5 kBit/s with good SNR could be observed.
Holtorf, Christian (2018)
Zeitschrift für Kulturwissenschaften 2018 12 (1), 83–89.
DOI: 10.14361/zfk-2018-120110
Kriegel, Martin; Doumbia, Moustapha; Schaub, Michael; Zielke, Benjamin; Müller, Dirk; Azem, Abdul; Hoffmann, Martin; Mathis, Paul (2018)
Kriegel, Martin; Doumbia, Moustapha; Schaub, Michael; Zielke, Benjamin; Müller, Dirk...
Gemeinsamer Endbericht.
DOI: 10.2314/GBV:1039898874
Nagel, Andreas; Kohls, Niko; John, D. (2018)
In D. Matusiewicz & L. Kaiser (Eds.). Digitales Betriebliches Gesundheitsmanagement (pp. 347-357). Wiesbaden: Springer Gabler., 347-357.
Hochschule Coburg
Friedrich-Streib-Str. 2
96450 Coburg